THE SURFACE MUST BE PERFECTLY DRY, AND FREE OF ANY OILS OR CONTAMINANTS FOR THE DASH KIT TO ADHERE PROPERLY!

USE THE ALCOHOL PADS INCLUDED IN THIS KIT TO WIPE ALL SURFACES CLEAN. IN MANY CASES THE SURFACE MAY REQUIRE ADDITIONAL CLEANING. IT IS HANDY TO HAVE A SMALL BOTTLE OF ISOPROPYL  ALCOHOL 70%, ON HAND. WHICH CAN BE PURCHASED IN ANY DRUG OR GROCERY STORE AS THE ALCOHOL PADS DRY OUT EXTREMELY FAST.

STEP 2: REMOVE THE INDIVIDUAL PIECE

IDENTIFY THE LOCATION ON THE DASH WHERE EACH PIECE IN THE KIT IS TO BE APPLIED. IN PREPARATION FOR THE INSTALLATION OF EACH PIECE, SIMPLY LIFT IT OFF THE PACKING BOARD. DRY FIT THE PIECE PRIOR TO REMOVING THE BACKING. ONCE DRY FIT IS ACHIEVED, REMOVE THE 3M TAPE BACKING (CAUTION: TO INSURE THE STRONGEST ADHESION,  AVOID MAKING DIRECT CONTACT WITH THE ADHESIVE SURFACE)

STARTING WITH ANY OF THE LARGER PIECES AND BEGINNING FROM ANY EDGE, APPLY THE PIECE ONTO THE DASH. DO NOT PRESS FIRMLY INTO PLACE AT THIS TIME.

IF THE PIECE IS NOT POSITIONED PROPERLY, SIMPLY LIFT IT UP AND REINSTALL TO ACHIEVE THE DESIRED FIT.

INSTALLATION IS NOW COMPLETE. YOUR SHERWOOD DASH KIT WILL PROVIDE YOU WITH MANY YEARS OF PRODUCT SATISFACTION WHILE IT INCREASES THE VALUE OF YOUR VEHICLE. THANK YOU FOR YOUR CONFIDENCE IN SHERWOOD DASH, INC. TRIM PRODUCTS,
DISTRIBUTED BY KOULCARZ